Cheerson CX-91 Jumper FPV Racing Drone RTF (Mode 2)
Looking for your first 250 size FPV racing drone, but bemused by the range of options available?
If you are, then the CX-91 Jumper might just be the answer you're looking for.
Designed as an integrated package, the CX-91 has a performance that brings a smile to the face of even the most demanding racer at a price that is sure to bring one to the face of everyone else too!
With everything that you need to begin FPV racing in the box apart from 4 x AA batteries for the transmitter (not forgetting plenty of practice) this drone can be in the air in as little time as it takes to charge the included 1600mAh 3 cell LiPoly flight battery.
The main structure of the CX-91 is made from glass reinforced plastic to give you a versatile frame that will take the inevitable tumbles in its stride without adding excessive weight. This, combined with the 1806 brushless motors, LED lighting system and unique 3 blade propellers, with unique locking mechanism, gives the CX-91 a sparkling performance that matches its looks.
Of course, this wouldn't be an FPV racer without some kind of video equipment on board, and here again, the CX-91 exceeds expectations: a 720 x 1280 NTSC HD video camera paired with a 32 channel 5.8GHz video transmitter complete with SD card port for recording your flights and a circular polarized antenna for crisp video reception under race conditions.
The stylish CX-91 transmitter is fitted with a high-definition 4.3" TFT LCD screen, complete with On Screen Display (OSD) to give you real-time information on your battery state.
The CX-91 gives you a near-perfect introduction to FPV racing without the hassle of having to source individual components at the same time as matching the performance of many high-end FPV drones.
• Highly agile FPV racer
• Mode 2 (left hand throttle) custom transmitter
• Optional flight modes
• Tough carbon fiber structure
• Up to 300m range
• 720 x 1280 HD camera
• 5.8G 32CH video transmitter with automatic frequency search
• Full color TFT LCD monitor with built-in OSD
Type: RTF FPV racing drone
Battery: 11.1V 1600mAh LiPoly battery (Included)
Motors: 1806 Brushless
ESC: 4 in 1 18A brushless ESC
Rotor dia: 120mm
Working temperature: -10°C to +40°C
Flying time: 10~12mins
Dimensions: 240 x 250 x 80mm
Channels: 32 CH
Camera: 720 x 1280
Video format: NTSC
Monitor screen: 4.3" color
Type: TFT LCD
Resolution: 480 x 272 pixels
Aspect ratio: 16:9
Brightness: 500 cd/m2
Power consumption: 500mW
Built-in battery: 2200mAh
Working time: <2hrs
Dimensions: 123 x 80 x 15mm
For details of frequencies, please refer to the manual under the files tab below.
1 x Cheerson CX-91 Jumper FPV Quadcopter
1 x 11.1V 1600mAh 35C 3S battery
1 x 5.8G antenna
1 x Cheerson CX-91 5.8G Transmitter
1 x 4.3 inch 5.8G 32CH Monitor w/visor
1 x Monitor holder
1 x Mushroom antenna
8 x Black propeller
1 x Balance charger
1 x Screw driver
1 x Wrench
1 x Memory card set
1 x Data transmission cable
1 x Manual
4 x AA batteries (for transmitter)
Combo itemsThe following items can be purchased with a combo-price, if you put them in the cart with Cheerson CX-91 Jumper FPV Racing Drone RTF (Mode 2). Attention: these products may have more beneficial buddy-price or promo-price.
|HobbyKing™ FPV Racing 3.5m Air Cone|
|FPV Racing Air Gate - Small|
|FPV Racing Air Gate - Large|